Данный F.A.Q. составлен по материалам из свободных источников интернета, писем читателей рассылки "EVM-News" и личного опыта составителя.



1. Подключение IrDA к материнской плате.

Abit (http://www.abit.com.tw)
Acorp
Albatron
Asus (http://www.asus.com)
A-Trend (http://www.riascorp.com/pc_solutions)
Biostar (http://www.biostar-europe.com)
Chaintech (http://www.chaintech.com.tw)
DFI (http://www.dfi.com)
Elitegroup (http://www.elitegroup.de)
ENMIC/NMC-PE (http://www.enmic.de)
Epox (http://www.elito-epox.com/)
FIC (http://www.fic.com.tw)
Gigabyte (http://www.gigabyte.com.tw)
Intel (http://www.intel.com)
Isus (http://www.isys.com.tw/ )
Inne plyty
Lucky Star (http://www.lucky-star.com.tw/)
Legend QDI (http://www.qdi.nl/german)
Medion (http://www.medion.de/)
MSI (http://www.msi.com.tw/)
PCchips (http://www.pcchips.com/)
PCPartner (http://www.pcpartner.com.hk/ )
Siemens (http://www.fujitsu-siemens.de/ )
Shuttle Spacewalker (http://www.spacewalker.com/ )
Soltek (http://www.soltek.de/ )
Soyo (http://www.soyo.com/ )
Tekram (http://www.tekram.de/ )
Tyan (http://www.tyan.de/ )

Abit


BE6 Rev. 1.0, BH6 Rev.2


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Integrated Peripherials:
           Onboard IR function: IrDA
           RxD,TxD active: hi,lo
           IR transmission delay: enabled



BH6 Rev. 1.0


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
           IrDA
           HI,LOW & Delayed



BM6


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
           Hi/Hi
           Ir Transmission Delay: Disabled



BP6


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
           Onboard IR function: IrDA
           RxD,TxD active: hi,lo
           Ir Transmission Delay: Disabled
           В некоторых версиях BIOS:
           IR Transmission delay: Enabled



BX6 Rev.2


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx




KT7, KT7 RAID


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
           Onboard IR Funktion: HPSIR
           IR-Funktion Duplex: Full
           Ewentualne: Half

Acorp



6ZX86(SLOT)


Integrated Peripherals:
Uart2 mode: IrDA 1.0
Duplex Select: Full
Tx, Rx Active: Lo, Hi





7KTA2E


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Integrated Peripherals:
           UATR 2 MODE -> HPSIR
           IR  FUNCTION DUPLEX  -> HALF
           TX,RX INVERTING ENABLE -> NO,YES






Albatron


PX845PEV/Pro


(6 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx
           Onboard SP2: 2F8/IRQ3
           UART Mode Select: IrDA
           RxD,TxD Active: Hi,Lo
           IR Transmission Delay: Enabled
           UR2 Duplex Mode: Half
           US IR Pins: Half



Asus





A7V8X-X - не поддерживает IrDA
P4P800  - не поддерживает IrDA


P4B533


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Advanced:
I/O Device Configuration:
            UART2 Use as: IR


TX97


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Chipset Features Setup:
           UART2 Use Infrared: Enabled


TUSL2-C


(2x12 pins)
1=Vcc, 3=Rx, 4=GND, 5=Tx

BIOS Setup --> Advancer --> I/O Device Configurator:
    UART2 Use as: [IR] 
 Onboard CIR I/O: [Disabled]





A-Trend


ATC-6130, ATC-6230


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx






Biostar


M6TLG


(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx


M6TBA


(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx
Integrated Peripherials Setup:
           Uart 2 Mode: IrDA SIR
           Level Lo/Hi


M7MKA


(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx
           Uart Mode Select: IrDA
           Uart 2 Duplex Mode: Full
           Rxd,Txd Active: Hi,Hi
           Ir Transmission delay: Enabled


M7MKE


(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx
           Uart 2 Mode: HPSIR
           IR Function Duplex: Full
           TX,RX Inverting enable: No,Yes





Chaintech


5AGM2


(2x4 pins) 3=GND, 4=GND, 6=Rx, 7=Vcc, 8=Tx


5IFM-1, 5TDM2 Baby-AT, 6VTA2 Baby-AT, 6LTM2 Baby-AT


(6 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx, 6=Vcc
           Com2 Mode: Irda
           Infrarot Mode: full deplex

CT-6OJV


(2x6 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx










DFI


P5BV3+, P6BV3+ (/66), K6XV3+ (/66)


(5 pins) 1=Tx, 2=GND, 4=Rx, 5=Vcc


           Bios Mode: HPSIR
           Duplex: Full
           Use IR Pins: TX2RX2



Elitegroup


K7S5A Rev.1 & Rev.3


(2x3 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx


           Serial Port2 Mode: IrDA


K7S5A+, K7S5A2, K7S6A


(2x3 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx


           UART Mode Select: IrDA
           UR2 Duplex Mode: Half albo Full


P5VP-A+, P5VX-BE, P6BAT-A+, K7VTA1, K7VTA3


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx





ENMIC/NMC-PE


3VAX, 5VM5, 5VMe  (e/x)


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           UART 2 MODE: HPSIR
           Duplex: Full
           Pegel: Lo,Hi


6BB (x)


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           UART-Mode: IrDA
           RxD,TxD Active: Hi,Lo
           IR Transm Delay: Disabled


7VAX, 8TTX+


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           UART 2 Mode: HPSIR
           IR Function Duplex: Full
           RxD Active: Lo,Hi





Epox


EP-7KXA, EP-8KTA+, EP-8KTA3 (+), EP-MVP3C2


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           Uart2 Mode: HPSIR
           Ir Function Duplex: Full
           Tx,Rx inverting mode: No,Yes


EP-MVP3E-M, EP-MVP3G5


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           UART Mode 2: HPSIR
           IR Function Duplex: Duplex
           RxD, TxD active: Lo, Hi.




8RDA3+


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           UART Mode Select: [IrDA]
           RxD, TxD Active: [Hi,Lo]
           IR Transmission Delay: [Enable]
           UR2 Duplex Mode: [Full]
           Use IR Pins: [IR-Rx2Tx2]




8K9A


UART mode Select       [IRDA]
RxD, TxD Active	       [Hi, Lo]
Ir transmission delay  [Enable]
UR2 Duplex Mode        [Full]
Use ir Pins            [Ir-Rx2Tx2]





FIC


KA-6130, PA-2007, PA-2012


(2x5 pins) 1=Vcc, 3=Rx, 5=GND, 7=Tx, 9=Vcc


           Uart2 Mode: HPSIR
           Ir Function Duplex: Full
           Rx,Tx Active: Lo,Hi





Gigabyte


GA-586HX, GA-5SG100


(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc


GA-5AA Rev. 3.2


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


Integrated Perpherals:
           Onboard serial port: COM 3
           Serial Port Mode: IrDA




GA-686LX


(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc


Integrated Perpherals:
           Onboard serial port 2: AUTO
           IR address select: 3e8h
           IR mode: HP SIR
           IR IRQ select: IRQ 3


GA-6BA, GA-6BXE


(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc


           Onboard Serial Port 2: Auto
           UR2 Mode: IrDA 1.0
           UR2 Duplex Mode: Half


GA-6BA, GA-6BXE


(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc


           Onboard Serial Port 1: AUTO
           UART 2 Mode: HPSIR
           IR Function Duplex: Full
           TX, RX Inverting Enable: No, Yes



GA-6OMM7


(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc




GA-6OXM7E-1, GA-60X



(10 pins) 1=Vcc, 3=RX, 4=GND, 5=TX


Integrated Perpherals:

        UART Mode Select: IrDA

        UR2 Duplex Mode: Half


GA-71XE4


(5 PINS)  1=VCC, 2=NC; 3=IR DATA INPUT;  4=GND; 5=IR DATA OUTPUT


Integrated Perpherals:

        Serial PortB Mode: IrDA

        Duplex Mode: Half Duplex


GA-7VA-C - не поддерживает IrDA


GA-7ZX, GA-7ZXR


(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc


Integrated Peripherals:
           Serial PortB Mode: IrDA
           Duplex Mode: Half Duplex


IPE1000G, 8IPE1000
(10 pin) 1=Vcc, 3=Rx, 4=GND, 5=Tx


IrDA -> Enable






Intel


SR440BX, Advanced/ZP Baby-AT Board (Zappa)



(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc


D845HV, D845WV


(2x8 pins) 9=Vcc, 11=Rx, 13=GND, 15=Tx





Isus


i2k-10V (VIA MVP4 Chipset)


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


Integrated Peripherals:
           IR/COM2 Mode Select: IrDA (HPSIR)





Inne plyty


P5I430VX/250, Plyta z VxPro+ Chipset Via


(4 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc


BPR5 R2 PCI Mainboard, FT440BX 


(5 pins) 1=Vcc, 3=Tx, 4=GND, 5=Rx





Lucky Star


PV-1A


(4 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc
           IR-Mode: HP SIR


6ABX2V, 6VBX2


(7 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc, 7=GND





Legend QDI


5ALI61, KINETIZ 7B


(6 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx, 6=Vcc





Medion


9901


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx





MSI


K7Pro (=MS6195)



(2x5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           COM2 Typ: IrDA


MSI K7T Pro (MS-6330)


(2x5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


Integrated peripherals:
           UART 2 Mode: HPSIR
           IR Function Duplex: half
           TX, RX inverting enable: No, Yes


MSI-6117, MSI-6119, MSI-6151


(2x5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


           UART Mode: Irda
           Rxd,Txd Active: Hi,Lo
           IR Tansmitiondelay: Enabled


MSI MS-6199VA


Integrated peripherals
           UART Mode select: IrDA
           RxD,TxD active: hi,lo
           IR transmission delay: enabled


K7T266 PRO2-RU (MSI-6380)


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx

Integrated peripherals
           Serial Port2 Mode: 3/16 Baud
           IR Duplex Mode: Half Duplex
           IR Pin Select: IRRX/IRTX



KT3 Ultra2 


(2x3 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx


Integrated peripherals
           Serial Port2 Mode: 3/16 Baud
           IR Duplex Mode: Half Duplex
           IR Pin Select: IRRX/IRTX






PCchips


M761 Rev. 3.1b


(7 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx, 6=Vcc, 7=GND





PCPartner


VIB423DS


(5 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc





Siemens


D981


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx





Shuttle Spacewalker


AB61, HOT-579, Inne


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx





Soltek


SL-54U5, SL-67B, SL-67FV1, SL-77KV


(2x15 pins) 6=Tx, 7=GND, 8=Rx, 10=Vcc





Soyo


5BT5, 6VBA133


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx


Intergrated Peripherals
           UR2 Mode: IRDA 1.0
           UR2 Duplex Mode: Full





Tekram


P5MVP-A4 Rev. 1.1


(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Intgerated Periphals Setup:
           Infrared/COM2 Selected: IrDA SIR (HPSIR)





Tyan


Trinity 100 AT S1590


(2x15 pins) 6=Vcc, 8=Rx, 9=GND, 10=Tx